| Input Voltage |
90 ~ 264VAC 127 ~ 370VDC |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
0.95/230VAC 0.95/115VAC at full load |
| AC Current |
11.2A/115AVC 5.6A/230VAC |
| Inrush Current |
32A/115VAC 63A/230VAC |
| Leakage Current |
<2mA / 240VAC |
| Setup, Rise Time |
1500mS, 50mS/230VAC 1500mS, 50mS/115VAC at full load |
| Hold Time |
24mS/230VAC 24mS/115VAC at full load |
| Over Load Protection |
115~140% of rate load |
| |
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shunt down o/p voltage, re-power on to recover |
| Over Temperaure Protection |
95°C (TSW1) Detect on the heatsink of PFC MOSFET |
| |
90°C (TSW2) Detect the winding of output choke |
| |
Shun down o/p voltage, recovers automatically after temperature goes down |
| Remote Control |
RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current <20mA |
| Working Temperature |
-10°C ~ +65°C (Refer to output load derating curve) |
| Storage Temperature, Humidity |
-20°C ~ +85°C , 10~95% RH |
| Working Humidity |
20~90% RH non-condensing |
| Temperature Coefficient |
±0.03%/°C (0~50°C) |
| Vibration |
10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| Safety Standards |
UL60950-1, TUV EN60950-1 Approved |
| EMC |
Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204, |
| |
EN61000-4-2,3,4,5,6,8,11; EN55024, Light industry level, criteria A |
| MTBF |
59.6K hrs min. MIL-HDBK-217F (25°C ) |
| Dimensions |
278 x 129 x 127mm |